<code>
################################################################################
# Filename:      /etc/X11/xorg.conf
# Purpose:       config file for xserver - generated by grml-x
# Bug-Reports:   see http://grml.org/bugs/
# Latest change: samedi 16 juin 2007, 06:20:23 (UTC+0200)
# See also:
#   /usr/share/doc/xserver-xorg/   and
#   http://wiki.x.org/wiki/Home    and
#   http://ftp.x.org/pub/X11R7.0/doc/html/index.html for information on Xorg
# Refer to the xorg.conf man page and to
# http://ftp.x.org/pub/X11R7.0/doc/html/xorg.conf.5.html
# for details about the format of this file.
#
# If you would like this file to be automatically reconfigured by debian,
# run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
################################################################################

Section "ServerLayout"
        Identifier     "XServer Configured"
        Screen      0  "Screen0" 0 0
        # InputDevice    "Keyboard0"     "CoreKeyboard"
        # InputDevice    "Generic Mouse" "CorePointer"
        # InputDevice    "USB Mouse"     "CorePointer"
        # InputDevice    "PS/2 Mouse"    "CorePointer"
        # No synaptics/alps touchpad present.
        # No serial mouse detected.
EndSection

Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"  # allows the server to start up even if the mouse does not work
        Option "DontVTSwitch"        "false" # allow switching between virtual terminal
        # Option "DontZap"             "true"  # disable <Crtl><Alt><BS> (server abort)
        # Option "DontZoom"            "true"  # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Files"
        # More information:  http://ftp.x.org/pub/X11R7.0/doc/html/fonts.html
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        # FontPath     "/usr/share/fonts/ttf/western"
        # FontPath     "/usr/share/fonts/ttf/decoratives"
        FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
        FontPath     "/usr/share/fonts/latex-ttf-fonts"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

# Modules - see /usr/X11R6/lib/modules/fonts and /usr/X11R6/lib/modules/extensions
Section "Module"
        Load  "dbe"       # double buffer extension
        Load  "dri"       # direct rendering
        Load  "glx"       # 3D layer
        Load  "type1"     # font module
        Load  "freetype"  # font rendering
        Load  "extmod"    # some commonly used server extensions (e.g. shape extension)
        Load  "record"    # recording extension
        Load  "evdev"     # generic input handling driver on Linux
        # Load  "vbe"       # Vesa BIOS Extension
        # Load  "ddc"       # ddc probing of monitor
        # Load  "bitmap"    # bitmap fonts
        # Load  "GLcore"    # render OpenGL in software
        # Load  "i2c"       # I2C bus
        # Load  "int10"     # initialize graphics cards via int10 call to the BIOS
        # Load  "speedo"    # font module
        # Load  "v4l"       # Video for Linux
# Valid entries - see /usr/lib/xorg/modules/[extensions/]
# afb bitmap cfb cfb16 cfb24 cfb32 cw damage dbe ddc dri drm extmod fb
# fbdevhw freetype GLcore glx i2c int10 int10 layer mfb pcidata rac ramdac
# record scanpci shadow shadowfb type1 vbe vgahw xaa xf1bpp xf24_32bpp xf4bpp
# xf8_16bpp xf8_32bpp xtrap
EndSection

# If you'd like to switch the positions of your capslock and control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
# More information: http://ftp.x.org/pub/X11R7.0/doc/html/XKB-Config.html
# Section "InputDevice"
#         Identifier  "Keyboard0"
#         Option      "CoreKeyboard"
#         # Driver      "kbd"
#         Option      "XkbRules"   "xfree86"
#         Option      "XkbRules"   "xorg"
#         Option      "XkbModel"   "pc105"
#         Option      "XkbLayout"  "fr,us"
#         Option      "XkbVariant" "nodeadkeys"
#         # Option      "XkbOptions" "ctrl:swapcaps,grp:alt_shift_toggle,grp_led:scroll,compose:menu"
# EndSection

# More information: http://ftp.x.org/pub/X11R7.0/doc/html/mouse.html


# Section "InputDevice"
#         Identifier      "Generic Mouse"
#         Driver          "evdev"
#         Option          "Device"                "/dev/input/mice"
#         Option          "Protocol"              "auto"
#         Option          "ZAxisMapping"          "4 5"
#         Option          "Buttons"               "5"
#         Option          "SendCoreEvents"        "true"
# EndSection

Section "Monitor"
        Identifier   "Monitor0"
#       ModelName    "Old Monitor (no DDC)"
        Option       "DPMS"      "true"
#       HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
#       HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
        HorizSync    30.0 - 81.0
#       VertRefresh  50.0 - 76.0 # Very conservative. May flicker.
#       VertRefresh  50.0 - 60.0 # Extreme conservative. Will flicker. TFT default.
        VertRefresh  56.0 - 75.0
# Need more information?
#  http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
#  http://en.tldp.org/HOWTO/XFree86-Video-Timings-HOWTO/
EndSection

Section "Device"
        ### Available Driver options are:
        ## sw_cursor is needed for some ati and radeon cards
        # Option     "sw_cursor"
        # Option     "hw_cursor"
        # Option     "NoAccel"
        # Option     "ShowCache"
        # Option     "ShadowFB"
        # Option     "UseFBDev"
        # Option     "Rotate"
        ## xorg + nvidia:
        # Option "RenderAccel" "true"
        # Option "AllowGLXWithComposite" "true"
        Identifier  "Card0"
        # The following line is auto-generated by grml-x
        Driver      "nv"
        VendorName  "All"
        BoardName   "All"
        ## Workaround for drivers (for example radeon) which might send output to wrong device:
        # Option "MonitorLayout" "LVDS, AUTO"
        # Option "MonitorLayout" "LVDS, CRT"
        # Option "MonitorLayout" "NONE, STV"
        # Option "MonitorLayout" "LVDS"
        ## Specify BusID:
        # BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultColorDepth 16
        SubSection "Display"
                Depth     1
                # Modes "1440x900" "1280x1024" "1024x768" "800x600" "720x400" "640x480" 
        EndSubSection
        SubSection "Display"
                Depth     4
                # Modes "1440x900" "1280x1024" "1024x768" "800x600" "720x400" "640x480" 
        EndSubSection
        SubSection "Display"
                Depth     8
                # Modes "1440x900" "1280x1024" "1024x768" "800x600" "720x400" "640x480" 
        EndSubSection
        SubSection "Display"
                Depth     15
                # Modes "1440x900" "1280x1024" "1024x768" "800x600" "720x400" "640x480" 
        EndSubSection
        SubSection "Display"
                Depth     16
                # Modes "1440x900" "1280x1024" "1024x768" "800x600" "720x400" "640x480" 
        EndSubSection
        SubSection "Display"
                Depth     24
                # Modes "1440x900" "1280x1024" "1024x768" "800x600" "720x400" "640x480" 
        EndSubSection
        SubSection "Display"
                Depth     32
                # Modes "1440x900" "1280x1024" "1024x768" "800x600" "720x400" "640x480" 
        EndSubSection
EndSection

# Make sure you have the relevant Debian packages on your system
# to be able to use DRI (libgl1-mesa-dri for example)
Section "DRI"
        Mode 0666
EndSection

#Section "Extensions"
#    Option "Composite" "Enable"
#EndSection

## END OF FILE #################################################################

</code>

<code>
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=0caad0e9-4ad1-4d6c-aa55-e8fde45e0bcd ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title		Ubuntu, kernel 2.6.20-16-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=0caad0e9-4ad1-4d6c-aa55-e8fde45e0bcd ro quiet splash
initrd		/boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title GeexBox 
root (hd0,3) 
kernel /vmlinuz root=/dev/hda4/GEERBOX rw init=linuxrc splash=silent vga=789 video=vesafb:ywrap,mtrr
initrd /initrd.gz
boot 

title		Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-16-generic root=UUID=0caad0e9-4ad1-4d6c-aa55-e8fde45e0bcd ro single
initrd		/boot/initrd.img-2.6.20-16-generic

title		Ubuntu, kernel 2.6.20-15-generic
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-15-generic root=UUID=0caad0e9-4ad1-4d6c-aa55-e8fde45e0bcd ro quiet splash
initrd		/boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title		Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root		(hd0,0)
kernel		/boot/vmlinuz-2.6.20-15-generic root=UUID=0caad0e9-4ad1-4d6c-aa55-e8fde45e0bcd ro single
initrd		/boot/initrd.img-2.6.20-15-generic

title		Ubuntu, memtest86+
root		(hd0,0)
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST
</code>